About Us
Quality Innovation
Value and Responsibility
4100XPCXXL
Track Shoe
Tumbler and Idler
ROLLER
Other Parts
Cone Crusher Parts
Jaw Crusher Parts
Impact Crusher Parts
Gyratory Parts
TIC Inserts Crusher Wear Parts
Manganese Hammer
Manganese Wear Parts
DHT Hammer
Alloy Wear Parts
Company News
0102030405
Reverse Engineering Worn Parts: How Does 3D Scanning Lead to a New Mining Casting?
2026-10-14
Table of Contents
The Short Answer: Yes, and the Pipeline Is Mature
What "Reverse Engineering a Worn Part" Actually Means in a Mining Context
The 4-Step Pipeline: From Worn Sample to Production Casting
When Reverse Engineering Wins (and When It D...
view
detail
Landed Cost Model for Castings From China: Freight, Duty and Tariff Line Items
2026-10-12
A mining procurement team that compares Chinese castings on FOB unit price alone is missing roughly a third of the real cost. The landed-cost model has to add ocean freight, insurance, US import fees, base duty, Section 301, Section 232 where applicable, I...
view
detail
OEM vs ODM vs Aftermarket: Which Sourcing Model Fits Your Wear Parts Brand?
2026-10-09
- The 3 sourcing models for a 2026 wear parts brand are OEM (the brand owns the print, the supplier manufactures to the print), ODM (the supplier owns the print and the brand buys the supplier's design), and aftermarket (the brand sources an equivalent part that fits the OEM-equipment application but is not licensed by the OEM).
Wear Parts Cost per Operating Hour: The TCO Formula Mines Actually Use
2026-09-29
When an Australian iron-ore operator sent us a 3-year spend summary last quarter, the wear parts line had run 200% over the planned budget. The parts themselves were correctly specified — manganese cones, TIC inserts, standard track shoes. The root c...
view
detail
When Do Premium Wear Parts Pay Back? An ROI Framework With Worked Examples
2026-09-24
The unit price on a wear-part quote is the smallest number on the page. The largest numbers are the wear life, the throughput, the downtime, and the energy draw — and any one of those can flip the answer to "is the premium worth it" without changing ...
view
detail
2026 Mining Wear Parts Trends: Digital Tracking and Predictive Change-Out
2026-09-23
The biggest shift in mining wear parts between 2020 and 2026 is not a new alloy or a new supplier — it is the data layer that now decides when each liner, blow bar, and jaw plate comes out of the crusher, and the procurement model that data is rewrit...
view
detail
Bulk Ordering Wear Parts: Container Economics and Inventory Planning for Distributors
2026-09-21
A distributor-side guide to bulk ordering wear parts — bucket teeth, crusher liners, undercarriage components, and shredder hammers — with container economics, pallet patterns, freight optimization, and inventory planning that keeps downtime sh...
view
detail
Sustainable Foundry Practices: Recycled Scrap in Manganese Steel Casting
2026-09-18
Recycled steel scrap is the standard metallic charge in manganese steel foundries, not the exception. The working question for a crusher wear-part buyer in 2026 is not whether recycled content is acceptable, but how the foundry controls it. This guide cove...
view
detail
Track Shoes for Arctic Mining: Low-Temperature Requirements Below -50 °C
2026-09-16
Every northern winter, the same conversation shows up in my inbox. A mine engineer in Yakutia or the Northwest Territories writes in to say the track shoes they bought from a temperate-climate supplier worked fine all summer and then started cracking at the ...
view
detail
How Much Do Bucket Teeth Cost? Price Drivers From Alloy Content to Freight
2026-09-14
Buyers searching "how much do bucket teeth cost" usually want a single dollar number